Check with seller Why does the pump body of the canned pump vibrate?

Published date: June 20, 2019
Views: 5

Canned pump is a kind of seamless pump. Both pump and driving motor are sealed in a pressure vessel filled with pumping medium. The pressure vessel is only statically sealed, and a wire group is used to provide rotating magnetic field and drive the rotor. Because of the sealing of the canned pump, when the pump body vibrates, we should eliminate the causes in time to avoid affecting the use of the pump. The common reasons for vibration of shielded pumps are as follows.
1. The center of the pump and motor is not correct.
2. The foot screw of the pump body or motor is loose or the foundation is not firm.
3. Insufficient tightening force of bearing cover. It makes the bearing bush jump in the body.
4. The mass of the rotor is unbalanced.
5. The volute pumps, especially some high-lift volute pumps, will also have different degrees of vibration when the flow rate is small, because the rotor has the role of radial force at this time. When the exit valve is opened to a certain extent, the vibration disappears immediately. Single-shell pumps can operate under high pressure, but their high temperature and heat shock resistance are different.
read more:
submersible solar water pump for agriculture
Hxk Case Rotating Pump Manufacturing In Iran
Rotary Vane Oil Vacuum Pump Two Stage Belt Pulley Vacuum Pump
high temperature vacuum nitrogen brazing furnace for electrical engineering material


Useful information

  • Avoid scams by acting locally or paying with PayPal
  • Never pay with Western Union, Moneygram or other anonymous payment services
  • Don't buy or sell outside of your country. Don't accept cashier cheques from outside your country
  • This site is never involved in any transaction, and does not handle payments, shipping, guarantee transactions, provide escrow services, or offer "buyer protection" or "seller certification"

Related listings

  • Common sense problems that steelmaking must understand
    Home - Furniture - Garden Supplies - - June 18, 2019 Check with seller

    9. What are the ways to reduce oxide inclusions in steel? Answer: To reduce oxide inclusions in steel, foreign inclusions should be minimized. Improve the purity of raw materials; adopt reasonable smelting process, deoxidation system and refining pro...

  • Introduction of adverse effects of idling of magnetic pump
    Home - Furniture - Garden Supplies - - June 14, 2019 Check with seller

    The damage and cost of the magnetic pump to the air will be great. The idling of magnetic pump causes damage to many parts, one pump body, internal magnetic steel, external magnetic steel, static ring, impeller, isolation sleeve, pump shaft, thrust r...

  • Common sense problems that steelmaking must understand (2)
    Home - Furniture - Garden Supplies - - June 12, 2019 Check with seller

    5. Briefly describe the characteristics and mineral composition of slag in the middle of smelting? Answer: In the middle of smelting, the reaction of carbon and oxygen in the furnace is intense, and the slag is prone to “back to dry”. Its characteris...


    Leave your comment (spam and offensive messages will be removed)